Used3TNV88C John Deere ZTrak™ Zero-Turn Mower - Emmetts Staying Power
Emmetts·VIC·2,024,080,001 hrs·Stock X
12 photos supplied by Emmetts and displayed from their website. See the original listing →
About this machine
This 3TNV88C Location and status is listed by Emmetts at VIC. It has 2,024,080,001 hours logged, so it is a high-hour machine.
As listed, it has a hydrostatic transmission and Gross at 3,000 rpm, PS: 37.4 hp 27.5 kW of power. The dealer's stock number is X.
Emmetts has not published a price for this machine — it is listed as price on application, so you will need to contact them for a figure.
Full photos, the dealer's own description and any additional detail are on Emmetts' website. Specifications shown here are as published by the dealer and are not independently verified — confirm hours, condition and GST treatment before you commit.
Specifications
| Make | 3TNV88C |
| Model | Location and status |
| Condition | Used |
| Hours | 2,024,080,001 hrs |
| Mower type | 7-Iron PRO - forged deck |
| Discharge | Side-discharge, rear-discharge |
| Mulching capability | Optional field-installed kit |
| Cut-height range | 3.8-12.7 cm (1.5-5 in.) 1.3 cm (0.25 in.) increments |
| Cutting width | 60, 72 in. 152, 183 cm |
| Height-of-cut adjustment | Turning knob with foot assist |
| Blade length | 53 cm (21 in.) |
| Blade width | 7.6 cm (3 in.) |
| Blade thickness | 6.35 mm (0.25 in.) |
| Blade tip speed | Side discharge: approximately 18,000 fpm Rear discharge: approximately 15,000 fpm |
| Number of blades | Three |
| Bearings | Grade=ABEC-1 |
| Spindles | Cold-forged and heat-treated |
| Spindle housings | Ductile cast-iron |
| Front anti-scalp rollers | LH, RH, Center |
| Rear anti-scalp rollers | LH, RH, Center |
| Deck construction | One-piece forged steel |
| Deck thickness | 7 gauge 0.180 in. 4.6 mm |
| Mower deck | Z930M |
| ROPS position | Height at top of ROPS |
| Full height | 216 cm (85 in.) |
| Down | 122 cm (48 in.) |
| Models | Location and status |
| Z700 ZTrak Mowers | 2024 and newer (SN 080,001-) |
| Z900 ZTrak Mowers with EFI engines | X |
| Z994R ZTrak Mowers | 2024 and newer (SN 070,001-) |
| Z997R ZTrak Mowers | 2021 and newer (SN 070,001-) |
| E Series QuikTrak Mowers | X |
| Q820M, Q850M, and Q850R QuikTrak Mowers | X |
| Q865R EFI QuikTrak Mowers | X |
| R Series commercial walk-behind mowers | 2025 and newer (SN 070,001-) |
| 1550 TerrainCut Front Mowers | X |
| 1600 TerrainCut Wide-Area Mowers | 2023 (SN 680,001-690,000) |
| Model | Compatible model years |
| Gasoline-powered Z900 ZTrak Mowers | 2024 and newer (SN 130,001-) |
| QuikTrak Mowers | 2024 and newer (SN 010,001-) |
| TerrainCut Front Mowers | 2022-2023 (SN 080,001-110,000) |
| Engine Manufacturer/model | 3TNV88C |
| Engine power | Gross at 3,000 rpm, PS: 37.4 hp 27.5 kW |
| Fuel tank capacity | 12 U.S. gal. 45.4 L |
| Transmission | Hydrostatic |
| Speed range | 0-11.5 mph 0-18.5 km/h |
| Drive wheels | 26x12-12 square shoulder 4-ply turf, optional 26x12-12 Michelin® Tweel® turf tires |
| Caster wheels | 15x6-6 |
| Manufacturer/Model | 3TNV88C |
| Power | Gross at 3,000 rpm, PS: 37.4 hp 27.5 kW |
| Displacement | 100.2 cu in. 1,642 cc |
| Cylinders | Three |
| Crankcase capacity | 3.8 U.S. qt 3.6 L |
| Oil filter | Full flow, replaceable, spin-on type |
| Lubrication | Full pressure |
| Cooling | Liquid |
| Injection Fuel System Fuel type | Diesel or Biodiesel (up to B20) |
| Fuel consumption Fuel tank capacity | 12 U.S. gal. 45.4 L |
| Fuel tank switch/shut-off valve | Yes |
| Charge system | 75 amp |
| Battery voltage | 12 V |
| Cold cranking amp | At 18 degrees C, 490 amp |
| Hour meter | Digital multi-function display |
| Operator presence starting system | Standard |
| Hydraulic pumps Wheel motors | Parker Ross TG0310, 18.9 cu in. 310 cc |
| Speed and direction control | Zero turn |
| Hydraulic capacity | Tank capacity, 3.2 U.S. gal. 12.1 L |
| Hydraulic oil cooler | Yes |
| Filter | Spin-on Type |
| Tires Drive wheels | 26x12-12 square shoulder 4-ply turf, optional 26x12-12 Michelin Tweel turf tires |
| Rear tires | 26x12-12 square shoulder 4-ply turf, optional 26x12-12 Michelin Tweel turf tires |
| Load rating | 4PR |
| Dynamic braking | Dual hand controlled levers |
| Park brake | Caliper disc brake |
| Park brake actuation | Hand lever |
| Type | Hydraulic clutch |
| Drive | Internal wet disk clutch |
| Height-of-cut range | Increments 0.25 in. 0.64 cm 1.5-5 in. 3.8-12.7 cm |
| Length | 60-in. (152-cm) side-discharge: 96 in. 244 cm |
| Thickness | 0.25 in. 0.64 cm Varies by deck size and configuration |
| Number | Three |
| Caster wheel type | Flat free |
| Height | With ROPs up, 85 in. 216 cm With ROPS down 48 in. 122 cm |
| Rollover protective structure (ROPS) | Yes |
| Slope operating limit | 20 degrees (10 degrees with material collection system) |
| Stock number | X |
| Location | VIC |
| Category | Mowers |
John Deere ZTrak™ Zero-Turn Mower - Emmetts Staying Power Full description on the dealer's site →
Similar mowers
About the repayment estimate
This repayment estimate is provided by Overdrive Commercial Funding Pty Ltd (ABN 87 659 049 895), an authorised credit representative of Connective Credit Services Pty Ltd, Australian Credit Licence 389328. The estimate is based on a Chattel Mortgage, which is only available where the purchaser intends to use the item primarily for commercial use. Fees and charges are not included in this estimate and may apply. If the item is a vehicle and is not listed with a drive-away price, the estimate does not include additional costs such as stamp duty and other government charges. This estimate should be used for information purposes only and is not an offer of finance on particular terms. It represents the estimated lowest repayment available from Overdrive Commercial Funding Pty Ltd's panel of lenders and products for this specific item each day, and includes several assumptions about the item, the purchaser and the loan. All loans are subject to eligibility criteria and Overdrive Commercial Funding Pty Ltd's loan approval process. A specific quote including details of all fees and charges, or finance for items intended for primarily or wholly personal use, can be obtained at overdrivefunding.com.au or by calling 1800 954 124.