Used124 Yanmar John Deere Compact Utility Tractor - Emmetts Staying Power

About this tractor
A 4 Yanmar Number of cylinders offered by Emmetts in Left-hand side, VIC. Built in 4, it is an older tractor at 2022 years, which is reflected in the asking price.
Emmetts has not published a price for this tractor — it is listed as price on application, so you will need to contact them for a figure.
Full photos, the dealer's own description and any additional detail are on Emmetts' website. Specifications shown here are as published by the dealer and are not independently verified — confirm hours, condition and GST treatment before you commit.
Specifications
| Year | 4 |
| Make | Yanmar |
| Model | Number of cylinders |
| Condition | Used |
| Model | Number of cylinders |
| 2038R | 3 |
| Engine power (gross) | 27.4 kW 37.3 hp SAE J1995 rated power |
| Power take-off (PTO) power | 22.7 kW 30.4 hp |
| Steering hydraulics | 15 L/min 4 gpm |
| Implement hydraulics | 20.2 L/min 5.3 gpm |
| Hitch type | Category 1 |
| Lift capacity, 24-in. behind link arms | 615 kg 1356 lb |
| Standard transmission; forward/reverse | Hydrostatic transmission (HST) |
| Cruise control | Standard |
| Wheelbase | 172.5 cm 67.9 in. |
| Family | GYDXL1.57TDA |
| Manufacturer | Yanmar |
| Engine model | 3TNV88C-NJT |
| Rated engine speed | 2500 rpm |
| Type | Category 1 |
| Injection pump type | Direct Injection |
| Aspiration | Turbocharged |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | 3 / 1.568 L 3 / 95.8 cu in. |
| Number of cylinders | Three |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 86x90 mm 3.39x3.54 in. |
| Compression ratio | 19.1:1 |
| Lubrication | Pressurized |
| Cooling system | Water pump |
| Air cleaner | Dual element |
| Engine torque at rated speed | 101.4 Nm 74.8 lb-ft |
| Fuel tank capacity | 32 L 8.5 U.S. gal. |
| Battery size | 500 CCA |
| Alternator (12-V) | 85 amp |
| Starter size | 1.4 kW 1.9 hp |
| Brakes | Wet disc |
| Steering | Power steering |
| Creeper | No |
| Differential lock | Yes |
| Pump rated output | Steering 15 L/min 4 gpm Implement 20.2 L/min 5.3 gpm 35.2 L/min 9.3 gpm |
| Pump type | Gear |
| Maximum operating pressure | 172.37 bar 2500 psi |
| Draft control sensing | Position control |
| Remote control valves available | Up to three |
| Standard | Rear - 540 rpm Mid - 2000 rpm |
| Optional Control | Independent |
| Clutch | Independent |
| Brake (for mid and rear PTO) | Wet disc |
| Rollover protective structure | Type Foldable ASABE S478 |
| Platform - flat/straddle | Flat |
| Gear shift location - console/floor | Left-hand side |
| Turning radius without brakes | 3 m 9.84 ft |
| Front | R1 Ag 7.00-12 R3 Turf 23x8.50-14 R4 Industrial 23x8.50-14 R3 Turf Radial 200/60 R15 |
| Rear | R1 Ag 12.4-16 R3 Turf 14-17.5 R4 Industrial 14-17.5 R3 Turf Radial 300/70 R20 |
| Tilt steering wheel | Yes |
| 12-V Outlet | Yes |
| Location | Left-hand side, VIC |
| Category | Tractors |
John Deere Compact Utility Tractor - Emmetts Staying Power Full description on the dealer's site →
Similar tractors
About the repayment estimate
This repayment estimate is provided by Overdrive Commercial Funding Pty Ltd (ABN 87 659 049 895), an authorised credit representative of Connective Credit Services Pty Ltd, Australian Credit Licence 389328. The estimate is based on a Chattel Mortgage, which is only available where the purchaser intends to use the item primarily for commercial use. Fees and charges are not included in this estimate and may apply. If the item is a vehicle and is not listed with a drive-away price, the estimate does not include additional costs such as stamp duty and other government charges. This estimate should be used for information purposes only and is not an offer of finance on particular terms. It represents the estimated lowest repayment available from Overdrive Commercial Funding Pty Ltd's panel of lenders and products for this specific item each day, and includes several assumptions about the item, the purchaser and the loan. All loans are subject to eligibility criteria and Overdrive Commercial Funding Pty Ltd's loan approval process. A specific quote including details of all fees and charges, or finance for items intended for primarily or wholly personal use, can be obtained at overdrivefunding.com.au or by calling 1800 954 124.







