Used1244N677 (M44) John Deere Ride-on Mower - Emmetts Staying Power
Emmetts·Rear, VIC·Stock No
12 photos supplied by Emmetts and displayed from their website. See the original listing →
About this tractor
Emmetts has this 44N677 (M44) 44N677 (M44) available at Rear, VIC.
As listed, it has 22 hp 16.4 kW of power. The dealer's stock number is No.
Emmetts has not published a price for this tractor — it is listed as price on application, so you will need to contact them for a figure.
Full photos, the dealer's own description and any additional detail are on Emmetts' website. Specifications shown here are as published by the dealer and are not independently verified — confirm hours, condition and GST treatment before you commit.
Specifications
| Make | 44N677 (M44) |
| Model | 44N677 (M44) |
| Condition | Used |
| Engine power | 22 hp 16.4 kW |
| Engine manufacturer/model | 44N677 (M44) |
| Transaxle type | Hydrostatic, 2-wheel drive |
| Transaxle control | Two-pedal foot-controlled hydrostatic |
| Rear tires | 20x10-8 |
| Steering type | Sector and pinion with single drag link and tie rod |
| Lift system type | Lever on fender deck |
| Cutting width | Edge™ mower deck, 48 in. 122 cm |
| Power | 22 hp 16.4 kW |
| Displacement | 44.2 cu in. 724 cc |
| Manufacturer/model | 44N677 (M44) |
| Type | Slide under tractor |
| Cylinders | V-twin |
| Governor | Mechanical |
| Choke/speed control | One lever |
| Cooling method | Air |
| Air cleaner | Cartridge |
| Oil drain | No tools |
| Fuel delivery | Pulse pump and carburetor |
| Fuel gauge | Mechanical, viewable from seat |
| Fuel tank location | Rear |
| Fuel fill opening | Center, 1.75 in. 4.45 cm |
| Fuel tank capacity | 2.4 U.S. gal. 9.1 L |
| Battery | 12 V 300 CCA |
| Charging system | Regulated, 9 amp |
| Engine starter | Bendix type |
| Hourmeter | Yes, with service reminder |
| Headlights | Two standard, incandescent |
| Taillights or reflector | No |
| Backup lights | No |
| Rear work lights | No |
| 12-V outlet | Optional accessory |
| Control | Two-pedal foot-controlled hydrostatic |
| Cruise control | No |
| Oil cooler | Fins and fan on transaxle |
| Oil filter | Yes, not serviceable |
| Differential lock | No |
| Forward speed | 0-5.5 mph 0-8.9 km/h |
| Reverse speed | 0-3.2 mph 0-5.1 km/h |
| Brakes | Internal wet disk |
| Frame | Full-length welded steel |
| Primer/paint | E-coat/powder |
| Weight bracket | Optional rear |
| Receiver hitch | No |
| Front axle | Cast-iron front axle, powdered-metal front wheel bushings |
| Spindle bushings | No |
| Front tires | 15x6-6 |
| Hood material | JD Loy, UV resistant |
| Fender deck material | Stamped steel |
| Floor mats | Yes, with debris removing channels |
| Storage | Storage tray with optional cover |
| Service interval decal | Yes |
| Fender handles/grips | No |
| Cup holder | Yes |
| Equipment mounting | CargO Mount™ system |
| Four-wheel steer | Not available on this model |
| Steering wheel | Standard, diameter - 12 in. 30.5 cm |
| Tilt steering wheel | No |
| Turning radius | 18 in. 45.7 cm |
| Uncut circle radius | 20 in. 50.8 cm |
| Seat back height | 15 in. 38.1 cm |
| Armrests | No |
| Fore-aft adjustment | While seated, 5.5 in. 14 cm |
| Seat suspension | Tilt, two coil springs |
| Hydraulic outlets | No |
| Mower cut height | 13 positions, 1-4 in. 2.5-10.2 cm |
| Cut height increments | 0.25 in. 0.64 cm |
| Preset cut height | No |
| Construction | Stamped steel deck shell |
| Mower deck material | Steel, 12 gauge 0.105 in. 2.7 mm |
| Mower wash port | Yes |
| Mower drive system | Electric power take-off (PTO) clutch |
| Mower wheels | Four |
| Mower wheel adjustment | One bolt |
| Mower level adjustment | Easy-level deck |
| Front draft arms | One spring clip |
| Rear draft arms | Two spring clips |
| Mower wheels rotate | No |
| Drive system | Single belt |
| Meets ANSI standard | Yes |
| Meets OPEI standard | Yes |
| Backup protection | Reverse Implement Option (RIO) |
| Safety video | Yes |
| Mowers | Standard, 48 in. 122 cm |
| Rear bagger | 2-bag, 6.5 bu 229 L |
| Front thatcher Front blade | 46 in. 116.8 cm |
| Mid-mount blade Snow blower | Two-stage, 44 in. 111.8 cm |
| Spreader | Tow-behind only, 125-175 lb 57.7-80 kg |
| Front bumper | Two-bar styled front bumper |
| Brush guard Weather protection | Snow cab |
| Sun canopy | Yes |
| Rear receiver hitch Bucket holder | Yes, single bucket |
| Grass striping | Lawn striping kit |
| Height | 44.5 in. 113 cm |
| Overall length | 70.3 in. 178.6 cm |
| Wheelbase | 48.9 in. 124.2 cm |
| Width with mower | 63 in. 160 cm |
| Width without mower Weight | Mower, no fuel, 475 lb 215 kg |
| Stock number | No |
| Location | Rear, VIC |
| Category | Tractors |
John Deere Ride-on Mower - Emmetts Staying Power Full description on the dealer's site →
Similar tractors
Used12
Used12
Used12
Used12
Used12T1004P 100HP 4WD Tractor with A/C Cab | UHI Machinery AU
$48,990GST n/s
UHI Machinery
View details $229/wk finance*
Used12
Used12
Used12About the repayment estimate
This repayment estimate is provided by Overdrive Commercial Funding Pty Ltd (ABN 87 659 049 895), an authorised credit representative of Connective Credit Services Pty Ltd, Australian Credit Licence 389328. The estimate is based on a Chattel Mortgage, which is only available where the purchaser intends to use the item primarily for commercial use. Fees and charges are not included in this estimate and may apply. If the item is a vehicle and is not listed with a drive-away price, the estimate does not include additional costs such as stamp duty and other government charges. This estimate should be used for information purposes only and is not an offer of finance on particular terms. It represents the estimated lowest repayment available from Overdrive Commercial Funding Pty Ltd's panel of lenders and products for this specific item each day, and includes several assumptions about the item, the purchaser and the loan. All loans are subject to eligibility criteria and Overdrive Commercial Funding Pty Ltd's loan approval process. A specific quote including details of all fees and charges, or finance for items intended for primarily or wholly personal use, can be obtained at overdrivefunding.com.au or by calling 1800 954 124.