Used12Kubota M Series - 50.0-135HP - Ongmac Trading Pty Ltd

About this tractor
A Kubota M Series - 50.0- - Ongmac Trading Pty Ltd offered by Ongmac Trading in NSW.
As listed, it has a grand x cab standard with air-conditioning. configuration. The dealer's stock number is c51ce410c124.
Ongmac Trading has not published a price for this tractor — it is listed as price on application, so you will need to contact them for a figure.
Full photos, the dealer's own description and any additional detail are on Ongmac Trading's website. Specifications shown here are as published by the dealer and are not independently verified — confirm hours, condition and GST treatment before you commit.
Specifications
| Make | Kubota |
| Model | M Series - 50.0- - Ongmac Trading Pty Ltd |
| Condition | Used |
| Hydraulic system | 16.6 gal [62.8 L] |
| Front axle | 11.1 qts [10.5 L] |
| 3-Point Hitch : Rear Type | II |
| Rear lift (at ends) | 5,560 lbs [2522 kg] |
| Rear lift (at 24″/610mm) | 6834 lbs [3099 kg] |
| Power Take-off (PTO) : Rear PTO | independent |
| Rear RPM | 540/1000 (1.375) |
| Engine RPM | 540@2205 |
| Dimensions & Tires : Wheelbase | 105.9 inches [268 cm] |
| Weight | 10373 lbs [4705 kg] |
| Front tire | 14.9R24 |
| Rear tire | 18.4R38 |
| Engine (net) | 50 hp [37.3 kW] |
| PTO (claimed) | 118 hp [88.0 kW] |
| Mechanical: Chassis | 4×4 MFWD 4WD |
| Differential lock | electro-hydraulic front and rear |
| Steering | hydrostatic power |
| Brakes | hydraulic wet disc |
| Cab | Grand X Cab standard with air-conditioning. |
| Hydraulics: Type | open center |
| Capacity | 16.6 gal [62.8 L] |
| Valves | 1 to 3 |
| Pump flow | 18.7 gpm [70.8 lpm] |
| Total flow | 29.3 gpm [110.9 lpm] |
| Steering flow | 16 gpm [60.6 lpm] |
| Rear RPMs | 540 (1.375) |
| Engine RPMs | 540@2205 |
| Pressure | 2844 psi [196.1 bar] |
| Kubota M96SHDM Power: Engine (net) | 95 hp [70.8 kW] |
| Dimensions & Tires : Weight | 6349 to 8576 pounds |
| PTO (tested) | 103.17 hp [76.9 kW] |
| Control | electronic lower-link draft control |
| Rear Arms | telescopic lower link ends |
| Clutch | hydraulic wet disc |
| Hydraulics: Valves | 2 to 4 |
| Stock number | c51ce410c124 |
| Location | NSW |
| Category | Tractors |
Price on application Product Brochure kubota-mx5100-features.pdf kubota-m108s-features-front.pdf kubota-m108s-features-rear.pdf kubota-m7040suhd-features.pdf kubota-m7040suh… Full description on the dealer's site →
Comparable listings in our index
19 listings for Kubota, ranging $14,000 to $110,000, median $29,000. These are dealer asking prices, not achieved sale prices.
Used12
New11
New12
New12Similar tractors
New6
Used4
Used4
Used4
Used4
Used4
Used12
Used12About the repayment estimate
This repayment estimate is provided by Overdrive Commercial Funding Pty Ltd (ABN 87 659 049 895), an authorised credit representative of Connective Credit Services Pty Ltd, Australian Credit Licence 389328. The estimate is based on a Chattel Mortgage, which is only available where the purchaser intends to use the item primarily for commercial use. Fees and charges are not included in this estimate and may apply. If the item is a vehicle and is not listed with a drive-away price, the estimate does not include additional costs such as stamp duty and other government charges. This estimate should be used for information purposes only and is not an offer of finance on particular terms. It represents the estimated lowest repayment available from Overdrive Commercial Funding Pty Ltd's panel of lenders and products for this specific item each day, and includes several assumptions about the item, the purchaser and the loan. All loans are subject to eligibility criteria and Overdrive Commercial Funding Pty Ltd's loan approval process. A specific quote including details of all fees and charges, or finance for items intended for primarily or wholly personal use, can be obtained at overdrivefunding.com.au or by calling 1800 954 124.
