Used74 Yanmar® 2025R Compact Utility Tractor
RDO Equipment·Left-hand side, QLD
5 photos supplied by RDO Equipment and displayed from their website. See the original listing →
About this tractor
RDO Equipment has this 4 Yanmar® Number of cylinders available at Left-hand side, QLD. Built in 4, it is an older tractor at 2022 years, which is reflected in the asking price.
RDO Equipment has not published a price for this tractor — it is listed as price on application, so you will need to contact them for a figure.
Full photos, the dealer's own description and any additional detail are on RDO Equipment's website. Specifications shown here are as published by the dealer and are not independently verified — confirm hours, condition and GST treatment before you commit.
Specifications
| Year | 4 |
| Make | Yanmar® |
| Model | Number of cylinders |
| Condition | Used |
| Model | Number of cylinders |
| 2025R | 3 |
| Specifications: Model | 2025R (Model year 2025) |
| Key Specs Engine power (gross) | SAE J1995 rated power: 17.8 kW 23.9 hp 24.2 PS at 3200 rpm |
| PTO power - Gear transmission | 12.8 kW 17.2 hp |
| Steering hydraulics | 13.4 L/min 3.5 gpm |
| Implement hydraulics | 13.4 L/min 3.5 gpm |
| Hitch type | Limited Category 1 |
| Standard transmission; forward/reverse | Hydrostatic - two range |
| Cruise control | Standard |
| Wheelbase | 1600 mm 63 in. |
| Power take-off (PTO) power | 13.6 kW 18.2 hp |
| Lift capacity, 24-in. behind link arms | 415 kg 915 lb |
| Engine Type | Diesel |
| Air cleaner | Dual element |
| Lubrication | Pressurized |
| Fuel tank capacity | 20.4 L 5.39 gal. |
| Manufacturer | Yanmar® |
| Engine model | 3TNV80F-NCJT |
| Engine power (gross) | SAE J1995 rated power: 17.8 kW 23.9 hp 24.2 PS at 3200 rpm |
| Rated engine speed | 3200 rpm |
| Injection pump type | Indirect injection |
| Aspiration | Natural |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | Three cylinders: 1.267 L 77 cu in. |
| Number of cylinders | Three |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 80 x 84 mm 3.2 x 3.3 in. |
| Compression ratio | 23.1:01 |
| Cooling system | Water pump |
| Engine torque @ rated speed | 53.1 Nm 39.1 lb-ft |
| Operating range | 1270-3170 rpm |
| Engine shutoff | Key switch |
| Engine torque at rated speed | 53.1 Nm 39.1 lb-ft |
| Fuel system Type | Indirect injection |
| Dimensions Wheelbase | 1600 mm 63 in. |
| Turning radius without brakes | Outside front tire: 2.51 m 8.2 ft |
| Limited slip differential | No |
| Power take-off (PTO) Standard | Rear - 540 rpm Mid - 2100 rpm |
| Control | Independent |
| Clutch | Wet disk |
| Brake (for mid and rear PTO) | Wet disk |
| Left-hand reverser | No |
| Final drive | Spur gear |
| Brakes | Wet disc |
| Steering | 13.25 L/min 3.5 gpm |
| Direction reverser; forward/reverse | Twin-touch pedals |
| Tires Front | R3 Turf: 23x8.50-12 R3 Radial: 220/55-R12 R4 Industrial: 23x8.50-12 |
| Rear | R3 Turf: 12-16.5 R3 Radial: 280/70 R16 R4 Industrial: 12-16.5 |
| Electrical Battery size | 500 CCA |
| Alternator (12-V) | 40 amp |
| Starter size | 1.2 kW 1.6 hp |
| Type | Foldable |
| Axle capacity Front | 612 kg 1349 lb |
| Creeper | No |
| Differential lock | Yes |
| Hydraulics Type | Open center |
| Pump rated output | 26.5 L/min 7.0 gpm |
| Implement | 13.25 L/min 3.5 gpm |
| Pump type | Gear |
| Maximum operating pressure, bar | 137 bar 1987 psi |
| Draft control type | Position control |
| Remote control valves available | Two |
| Maximum operating pressure | 137 bar 1987 psi |
| Draft control sensing | Position control |
| 3-point hitch Type | Limited Category 1 |
| Lift capacity at lift link ends | 650 kg 1433 lb |
| Fluid capacities Crankcase with filter | 2.7 L 2.9 gal. |
| Front axle gearcase (MFWD axle) | 3.4 L 0.9 gal. |
| Final drive Type | Spur gear |
| Platform - Flat/straddle | Three-piece semi flat |
| Gear shift location - Console/floor | Left-hand side |
| MFWD dimensions Wheelbase | 1600 mm 63 in. |
| Unballasted operating weight | 753 kg 1660 lb |
| Standard tires Front | R3 Turf: 23x8.50-12 R3 Radial: 220/55-R12 R4 Industrial: 23x8.50-12 |
| Miscellaneous Toolbox | Yes |
| Underhood muffler | Yes |
| Joystick SCV control | Yes |
| Axle type | Flanged |
| Tilt steering wheel | Yes |
| 12-V Outlet | Yes |
| Location | Left-hand side, QLD |
| Category | Tractors |
The John Deere 2025R compact utility tractor brings production ag technology and features to lifestyle blocks and small farm operations Full description on the dealer's site →
Similar tractors
About the repayment estimate
This repayment estimate is provided by Overdrive Commercial Funding Pty Ltd (ABN 87 659 049 895), an authorised credit representative of Connective Credit Services Pty Ltd, Australian Credit Licence 389328. The estimate is based on a Chattel Mortgage, which is only available where the purchaser intends to use the item primarily for commercial use. Fees and charges are not included in this estimate and may apply. If the item is a vehicle and is not listed with a drive-away price, the estimate does not include additional costs such as stamp duty and other government charges. This estimate should be used for information purposes only and is not an offer of finance on particular terms. It represents the estimated lowest repayment available from Overdrive Commercial Funding Pty Ltd's panel of lenders and products for this specific item each day, and includes several assumptions about the item, the purchaser and the loan. All loans are subject to eligibility criteria and Overdrive Commercial Funding Pty Ltd's loan approval process. A specific quote including details of all fees and charges, or finance for items intended for primarily or wholly personal use, can be obtained at overdrivefunding.com.au or by calling 1800 954 124.