Used74 Yanmar® 3033R Compact Utility Tractor

About this tractor
RDO Equipment has this 4 Yanmar® 3033R (Model year 2025) available at PowrReverser transmission: Right-hand side eHydro transmission: Not applicable, QLD. Built in 4, it is an older tractor at 2022 years, which is reflected in the asking price.
RDO Equipment has not published a price for this tractor — it is listed as price on application, so you will need to contact them for a figure.
Full photos, the dealer's own description and any additional detail are on RDO Equipment's website. Specifications shown here are as published by the dealer and are not independently verified — confirm hours, condition and GST treatment before you commit.
Specifications
| Year | 4 |
| Make | Yanmar® |
| Model | 3033R (Model year 2025) |
| Condition | Used |
| Specifications: Model | 3033R (Model year 2025) |
| Key Specs Engine power (gross) | SAE J1995 rated power: 23.7 kW 31.8 hp 32.2 PS at 2600 rpm |
| PTO power - Gear transmission | 19.5 kW 26.1 hp |
| Steering hydraulics | 23.5 L/min 6.2 gpm |
| Implement hydraulics | 34.3 L/min 9.1 gpm |
| Hitch type | Category 1 |
| Standard transmission; forward/reverse | PowrReverser transmission |
| Cruise control | PowrReverser transmission: Not applicable eHydro transmission: Standard |
| Wheelbase | 1727 mm 68 in. |
| Lift capacity, 24-in. behind link arms | 995 kg 2194 lb |
| Engine Type | Diesel |
| Air cleaner | Dual element |
| Lubrication | Pressurized |
| Fuel tank capacity | OOS: 37.4 L 10 U.S. gal. Cab eHydro transmission only: 47.6 L 12.6 U.S. gal. |
| Manufacturer | Yanmar® |
| Engine model | 3TNV88C-MJTV |
| Engine power (gross) | SAE J1995 rated power: 23.7 kW 31.8 hp 32.2 PS at 2600 rpm |
| Rated engine speed | 2600 rpm |
| Injection pump type | High pressure common rail direct injection |
| Aspiration | Natural |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | Three cylinders: 1.64 L 100 cu in. |
| Number of cylinders | Three |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 88x90 mm 3.46x3.54 in. |
| Compression ratio | 19.1:1 |
| Cooling system | Liquid |
| Engine torque @ rated speed | 87 Nm 64.2 lb-ft |
| Power take-off (PTO) power | PowrReverser transmission: 19.5 kW 26.1 hp eHydro transmission: 17.2 kW 23 hp |
| Engine torque at rated speed | 87 Nm 64.2 lb-ft |
| Fuel system Type | High pressure common rail direct injection |
| Dimensions Wheelbase | 1727 mile 68 in. |
| Turning radius without brakes | 2.8 m 9.2 |
| Turning radius with brakes | 2.7 m 8.8 ft |
| Front axle clearance | 171 mm 6.7 in. |
| Power take-off (PTO) Standard | Independent rear: 540 rpm |
| Control | Lever and switch |
| Clutch | Wet disk |
| Brake (for mid and rear PTO) | Wet disk |
| Optional | PowrReverser transmission: Mid - not applicable eHydro transmission: Mid - 2100 rpm |
| Left-hand reverser | PowrReverser transmission only |
| Final drive | Spur gear |
| Brakes | Multi-plate wet disk |
| Steering | 23.5 L/min 6.2 gpm |
| Differential lock | Yes |
| Transmission gear ranges | PowrReverser transmission: 12F/12R eHydro transmission: three-range, infinitely variable |
| Clutch, wet/dry | PowrReverser transmission: Wet disk |
| Optional transmission; forward/reverse | eHydro transmission |
| Front tread range | 1117 mm 44 in. |
| Rear tread spacing | 1031 mm 40.6 in. |
| Electrical Battery size | 500 CCA |
| Alternator (12-V) | 75 amp |
| Starter size | 1.4 kW 1.9 hp |
| Axle capacity Front | 1450 kg 3197 lb |
| Rear | 1850 kg 4079 lb |
| Hydraulics Type | Open center |
| Pump rated output | 57.8 L/min 15.3 gpm |
| Implement | 34.28 L/min 9.05 gpm |
| Pump type | Single |
| Remote control valves available | Up to six rear remotes |
| Maximum operating pressure | 172 bar 2495 psi |
| Draft control sensing | Position control |
| 3-point hitch Type | Category 1 |
| Fluid capacities Crankcase with filter | 4.3 L 4.5 gal. |
| Transmission and hydraulic system, gear | 26.5 L 6.5 U.S. gal. |
| Final drive Type | Spur gear |
| MFWD dimensions Wheelbase | 1727 mm 68 in. |
| Cab Doors | Two |
| Compliance | Complies with OSHA, SAE, and CSA standards for rollover protection |
| Visibility | 360 degree (angle) |
| Noise rating | 80 dBA |
| Seat equipment | Scissor-link |
| Pump rated output Steering | 23.48 L/min 6.2 gpm |
| Maximum operating pressure, bar | 172 bar 2494.65 psi |
| Rollover protective structure Type | Foldable |
| Platform - Flat/straddle | One-piece semi flat |
| Gear shift location - console/floor | PowrReverser transmission: Right-hand side eHydro transmission: Not applicable |
| Location | PowrReverser transmission: Right-hand side eHydro transmission: Not applicable, QLD |
| Category | Tractors |
The John Deere 3033R compact tractor provides the ultimate balance of clean performance and versatility for small ag and turf maintenance. Full description on the dealer's site →
Similar tractors
About the repayment estimate
This repayment estimate is provided by Overdrive Commercial Funding Pty Ltd (ABN 87 659 049 895), an authorised credit representative of Connective Credit Services Pty Ltd, Australian Credit Licence 389328. The estimate is based on a Chattel Mortgage, which is only available where the purchaser intends to use the item primarily for commercial use. Fees and charges are not included in this estimate and may apply. If the item is a vehicle and is not listed with a drive-away price, the estimate does not include additional costs such as stamp duty and other government charges. This estimate should be used for information purposes only and is not an offer of finance on particular terms. It represents the estimated lowest repayment available from Overdrive Commercial Funding Pty Ltd's panel of lenders and products for this specific item each day, and includes several assumptions about the item, the purchaser and the loan. All loans are subject to eligibility criteria and Overdrive Commercial Funding Pty Ltd's loan approval process. A specific quote including details of all fees and charges, or finance for items intended for primarily or wholly personal use, can be obtained at overdrivefunding.com.au or by calling 1800 954 124.







