Used74 Yanmar® 4044R Compact Utility Tractor
RDO Equipment·QLD
4 photos supplied by RDO Equipment and displayed from their website. See the original listing →
About this tractor
A 4 Yanmar® 4044R (Model year 2023) offered by RDO Equipment in QLD. Built in 4, it is an older tractor at 2022 years, which is reflected in the asking price.
RDO Equipment has not published a price for this tractor — it is listed as price on application, so you will need to contact them for a figure.
Full photos, the dealer's own description and any additional detail are on RDO Equipment's website. Specifications shown here are as published by the dealer and are not independently verified — confirm hours, condition and GST treatment before you commit.
Specifications
| Year | 4 |
| Make | Yanmar® |
| Model | 4044R (Model year 2023) |
| Condition | Used |
| Specifications: Model | 4044R (Model year 2023) |
| Key Specs Engine power (gross) | At 2600 rpm: 31.7 kW 43.1 hp |
| PTO power - Gear transmission | 24.1 kW 32.3 hp |
| Steering hydraulics | 23.5 L/min 6.2 gpm |
| Implement hydraulics | 42.3 L/min 11.2 gpm |
| Hitch type | Category 1 |
| Standard transmission; forward/reverse | eHydro Transmission (eHST) |
| Cruise control | Standard |
| Wheelbase | 185.5 cm 73 in. |
| Engine Type | Diesel |
| Air cleaner | Dual element with electronic restriction indicator |
| Lubrication | Pressurized |
| Fuel tank capacity | 56.9 L 15 U.S. gal. |
| Manufacturer | Yanmar® |
| Engine model | 4TNV88C-MJT |
| Engine power (gross) | At 2600 rpm: 31.7 kW 43.1 hp |
| Rated engine speed | 2600 rpm |
| Injection pump type | High pressure common rail direct injection |
| Aspiration | Natural |
| Emissions compliance | Final Tier 4 |
| Cylinders/displacement | Four 2100 cc 128.1 cu in. |
| Number of cylinders | Four |
| Cylinder liners | Cast-in-block |
| Bore and stroke | 88x90 mm 3.46x3.54 in. |
| Compression ratio | 19.1:1 |
| Cooling system | Liquid |
| Engine torque @ rated speed | 116 Nm 85.6 lb-ft |
| Operating range | 950-2750 rpm |
| Engine shutoff | Key switch |
| Family | EYDXL2.19NDA FYDXL2.19NDA GYDXL2.19NDA |
| Fuel system Type | High pressure common rail direct injection |
| Power take-off (PTO) Standard | None |
| Control | Position |
| Clutch | Wet disc |
| Optional | Field-installed 540/540E |
| Left-hand reverser | No |
| Final drive | Planetary |
| Brakes | Multi-plate wet disc |
| Steering | 23.5 L/min 6.2 gpm |
| Direction reverser; forward/reverse | No |
| On-the-go shifting | Yes |
| Transmission gear ranges | Infinitely-variable, three range |
| Clutch, wet/dry | Wet |
| Clutch disk diameter wet clutch | 129 mm 5.08 in. |
| Electrical Battery size | 770 CCA |
| Alternator (12-V) | 75 amp |
| Starter size | 2 kW 2.68 hp |
| Type | Foldable |
| Axle capacity Front | 1600 kg 3528 lb |
| Rear | Farm - 13.6-28 Turf - 44x18-20 or 22.5LL-16.1 Industrial - 16.9Lx24 |
| Creeper | SpeedMatch standard |
| Differential lock | Yes |
| Hydraulics Type | Open center |
| Pump rated output | 65.8 L/min 17.4 gpm |
| Implement | 42.3 L/min 11.2 gpm |
| Pump type | Single gear |
| Draft control type | Position control |
| Remote control valves available | Two in base; up tp five possible |
| 3-point hitch Type | Category 1 |
| Fluid capacities Crankcase with filter | 5.3 L 1.4 qt |
| Transmission and hydraulic system, gear | 47.3 L 12.5 gal. |
| Final drive Type | Planetary |
| Platform - Flat/straddle | Flat |
| MFWD dimensions Wheelbase | 185.5 cm 73 in. |
| Front axle clearance | 35.1 cm 13.8 in. |
| Turning radius without brakes | 3.0 m 9.84 ft |
| Unballasted operating weight | OOS: 1710 kg 3770 lb |
| Turning radius with brakes | 2.8 m 9.17 ft |
| Standard tires Front | Farm - 8-16 Turf - 27x10.5-15 or 27x12LL-15 Industrial - 10-16.5 |
| Front tread range | 148.1 cm 58.3 in. |
| Rear tread spacing | 137.2 cm 54 in. |
| Miscellaneous Underhood muffler | Yes |
| Joystick SCV control | Yes |
| Inboard planetary | Yes |
| Doors | Two |
| Seat suspension system | Air suspension with swivel |
| Compliance | OSHA, SAE, ASAE |
| Visibility | 360 degree (angle) |
| Location | QLD |
| Category | Tractors |
The 4044R offers intelligent productivity and powerful versatility for acreage owners, hobby farmers, and sports turf management operators. Full description on the dealer's site →
Similar tractors
About the repayment estimate
This repayment estimate is provided by Overdrive Commercial Funding Pty Ltd (ABN 87 659 049 895), an authorised credit representative of Connective Credit Services Pty Ltd, Australian Credit Licence 389328. The estimate is based on a Chattel Mortgage, which is only available where the purchaser intends to use the item primarily for commercial use. Fees and charges are not included in this estimate and may apply. If the item is a vehicle and is not listed with a drive-away price, the estimate does not include additional costs such as stamp duty and other government charges. This estimate should be used for information purposes only and is not an offer of finance on particular terms. It represents the estimated lowest repayment available from Overdrive Commercial Funding Pty Ltd's panel of lenders and products for this specific item each day, and includes several assumptions about the item, the purchaser and the loan. All loans are subject to eligibility criteria and Overdrive Commercial Funding Pty Ltd's loan approval process. A specific quote including details of all fees and charges, or finance for items intended for primarily or wholly personal use, can be obtained at overdrivefunding.com.au or by calling 1800 954 124.